ProtoCAM: Additive Manufacturing, 3D Printing and Rapid Prototyping.

News

ProtoCAM in the Community: Educating for the Future via the PA Dream Team

ProtoCAM’s Digital Marketing Director, Dale Bond, is a member of the PA Dream Team, a vivacious group of young individuals assembled by the Manufacturers Resource Center in Allentown, PA whose goal is to educate local youth about the various careers available within the manufacturing field.

ProtoCAM Launches Instant Quoting Platform

ProtoCAM will launch its new instant quoting platform Monday, March 30, 2020. Our quoting link will connect customers to a central quoting page where they may choose to use either our instant quoting platform or our traditional quoting form (“engineer-assisted quote”).

ProtoCAM Prints 3D Masks for COVID-19 Prevention

ProtoCAM is working with Filament Innovations to produce 3D-printed masks and face shield for preventing the spread of COVID-19 for use within St. Luke’s University Health Network.

ProtoCAM Will Continue to Offer Services During COVID-19

On March 19, 2020, the Governor of Pennsylvania declared the closure of all businesses that are non-life sustaining. ProtoCAM has been permitted to remain open during this time as a Plastics & Rubber Manufacturer and as a Medical Equipment and Supplies Manufacturer. 

ProtoCAM to Exhibit at 2020 Southern New England Design-2-Part Show [CANCELED]

Visit ProtoCAM and Vice President of Sales & Marketing, Bob Holbrook, in booth #219 at the Southern New England Design-2-Part show, April 15-16 in Uncasville, CT and meet the best manufacturers face-to-face.

ProtoCAM in the Community: Collaborating with the Ed Block Courage Award Foundation

ProtoCAM was once again asked by the Ed Block Courage Award Foundation, Inc. to 3D print the logos of all 32 National Football League (NFL) teams for the annual Ed Block Courage Awards Gala this year. The award recognizes one player from each NFL team for their demonstrated courage and inspiration throughout the season.

ProtoCAM to Exhibit at 2020 Southeast Design-2-Part Show [CANCELED]

Visit ProtoCAM and Vice President of Sales & Marketing, Bob Holbrook, in booth #124 at the Southeast Design-2-Part show, March 25-26 in Atlanta, GA and meet the best manufacturers face-to-face at the region’s largest contract manufacturing trade show.

ProtoCAM in the Community: Teaming Up w/ HMMS for the “What’s So Cool About Manufacturing?” Contest

ProtoCAM teamed up with Harrison-Morton Middle School in this year’s Dream It. Do It. PA’s 2020 student video contest, “What’s So Cool About Manufacturing?” Local manufacturers worked together with 31 middle school teams from Lehigh, Northampton, and Carbon counties and the Diocese of Allentown to create videos demonstrating how manufacturing can be fun and interesting, as well as a viable career choice.

ProtoCAM to Attend 2020 AMUG Conference [Canceled]

Join ProtoCAM from March 22-26, 2020, in Chicago, Illinois at the Additive Manufacturing Users Group (AMUG) Conference. At the conference, catch up with Ron Belknap, President and CEO of ProtoCAM,  and Ed Graham, our Vice President of Additive Manufacturing and learn about all our latest offerings.

ProtoCAM to Present at Plastics in Motion 2020

Join ProtoCAM at the Plastics in Motion conference in New Orleans, Louisiana, from March 9-12, 2020. Ed Graham, our Vice President of Additive Manufacturing, will present on “Trends in Additive Manufacturing: Reorienting the Industry for Production Manufacturing.”

ProtoCAM to Exhibit at PACK EXPO East 2020

ProtoCAM is headed to nearby Philadelphia, PA from March 3-5 to exhibit at this year’s PACK EXPO East. Come visit us in booth #2031!

ProtoCAM Introduces New Member of Additive Manufacturing Team

Kyle Lilley is the newest member of the ProtoCAM team! He joins us as an additive manufacturing technician in our finishing workshop.

ProtoCAM to Exhibit at 2020 SHOT Show in Las Vegas

Join ProtoCAM at the National Shooting Sports Foundation’s (NSSF) SHOT Show, January 20-21, 2019 in Las Vegas, Nevada! You can catch ProtoCAM at the Supplier Showcase, Monday and Tuesday (8:30 a.m. – 5:30 p.m.) in booth #52407.

ProtoCAM Achieves Safety Committee Certification

ProtoCAM recently began the process for Safety Committee Certification to efficiently meet Pennsylvania Workers’ Compensation Act, Article X safety regulations, and have now officially received certification.

ProtoCAM to Host Innovation Day Event

Welcome to ProtoCAM’s Innovation Day! Join us on Thursday, November 7th as we open our doors to the public in celebration of our 25th year in business.

ProtoCAM to Exhibit at the 2019 ICI Technical Conference & Expo

Visit ProtoCAM and Ed Graham, Vice President of Additive Manufacturing, in booth #249 at the 66th Annual Investment Casting Institute (ICI) Technical Conference & Expo, October 27 – 30, 2019 in St. Louis, MO!

ProtoCAM to Exhibit at 2019 Mid-Atlantic Design-2-Part Show

Visit ProtoCAM and Vice President of Sales & Marketing, Bob Holbrook, in booth #219 at the Mid-Atlantic Design-2-Part show, October 23 & 24 in Oaks, PA and meet the best manufacturers face-to-face at the region’s largest contract manufacturing trade show. Design-2-Part Shows are America’s longest running contract manufacturing trade shows for the sourcing of custom parts, services, and design. Design-2-Part is a comprehensive trade…

ProtoCAM to Exhibit at the 2019 Greater Philadelphia Manufacturing Summit

Join ProtoCAM and discover our latest 3D printing services at the 2019 Greater Philadelphia Manufacturing Summit in Oaks, PA on October 17th.

ProtoCAM to Present at Xpand3D Event

Join ProtoCAM and catch featured speaker Ed Graham, Vice President of Additive Manufacturing at ProtoCAM, at the Xpand3D event hosted by Cimquest October 15-17 in Branchburg, NJ.

ProtoCAM to Host Manufacturing Day 2019

Join us at ProtoCAM’s annual Manufacturing Day Event, Friday, October 4, 2019. Tours will run at 10 a.m. and 1:30 p.m. The annual National Manufacturing Day event invites teachers, classes, business professionals, and all interested others to learn firsthand about today’s manufacturing advances and careers.

ProtoCAM to Launch Instant Quoting Platform

Beginning in early 2020, ProtoCAM will introduce its new instant quoting platform. With our new instant quoting system, customers can upload their STL files and details and immediately receive a quote prior to placing an order.

ProtoCAM Visits the IronPigs for Annual 2019 Picnic

This past weekend, we headed out of the office to see the IronPigs at Coca-Cola Park for our annual ProtoCAM picnic! It was a beautiful sunny day for a ballgame featuring the Lehigh Valley IronPigs vs the Scranton/Wilkes-Barre RailRiders.

Summer Intern Hopes to Utilize ProtoCAM’s Capabilities in Building Racing Drones

ProtoCAM is pleased to welcome Nick Tomko, our solo summer intern this year. Tomko is participating in Governor Tom Wolf’s State Local Internship Program (SLIP), which provides summer internships to youth with local employers across Pennsylvania.

ProtoCAM to Exhibit at Atlantic Design & Manufacturing

Join ProtoCAM at the Atlantic Design & Manufacturing event (ADM) in New York, NY, June 11-13, 2019. Connect with Bob Holbrook, our Vice President of Sales and Marketing, and Chuck Hawley, our Technology Manager, on your latest 3D print project by visiting us in booth #402 at the event, which is located at the Jacob K. Javits Convention Center this year.

ProtoCAM in the Community: Getting To Know the Culinary Students at LCTI

At ProtoCAM, we’re always opening our doors to all those interested in our offerings, from students, to manufacturing professionals, to entrepreneurs, and everything in between! We recently invited some students from Lehigh Career & Technical Institute’s (LCTI) culinary program to tour our facility and also to show off their skills at our monthly birthday lunch.

ProtoCAM to Attend RAPID + TCT in Detroit, MI

Join ProtoCAM at RAPID + TCT 2019, from May 20-23 in Detroit, MI. RAPID + TCT is North America’s preeminent event for discovery, innovation, and networking in the field of 3D manufacturing.

ProtoCAM to Pursue ISO 9001:2015 Certification

ProtoCAM is committing to maintaining ISO 9001:2015 regulations in pursuance of certification. Though we have previously exercised compliance with ISO regulations, our commitment to providing superior service and products has led us to pursue certification.

ProtoCAM to Present at 2019 Additive Manufacturing Users Group Conference

Join ProtoCAM from March 31-April 4, 2019, in Chicago, Illinois at the Additive Manufacturing Users Group (AMUG) Conference. At the conference, Ed Graham, our Vice President of Additive Manufacturing will present on our collaborative project with Langhorne Carpet Company, which won first place in last year’s Technical Competition in the “Advanced Concepts” category at the conference.

ProtoCAM To Exhibit at Design-2-Part

Join ProtoCAM at the Design-2-Part show March 27-28 in Atlanta, GA and see the best manufacturers face-to-face at the region’s largest contract manufacturing trade show.

ProtoCAM Teams up with Local Middle School for “What’s So Cool About Manufacturing?” Contest

ProtoCAM teamed up with Catasauqua Middle School in this year’s Dream It. Do It. PA’s 2019 student video contest, “What’s So Cool About Manufacturing?” Local manufacturers worked together with 26 middle school teams from Lehigh, Northampton, and Carbon counties to create videos demonstrating how manufacturing can be fun and interesting, as well as a viable career choice.

ProtoCAM to Present at Advanced Manufacturing Technologies Show

Join ProtoCAM at the Advanced Manufacturing Technologies Show, presented by the Manufacturers Resource Center (MRC). The event will take place March 19th, 2019 from 8:30 a.m. – 12 p.m.

ProtoCAM in the Community: 3D Printing NFL Logos for a Good Cause

ProtoCAM was recently recruited by the Ed Block Courage Award Foundation, Inc. to 3D print the logos of all 32 National Football League (NFL) teams for the annual Ed Block Courage Awards Gala. The award recognizes one player from each NFL team for their demonstrated courage and inspiration throughout the season.

ProtoCAM Adds New Member to Customer Service Team

Jessica Kemmerer has joined our customer service team at ProtoCAM! She has taken on the role of Administrative Assistant here at our facility.

ProtoCAM Brings on New Additive Manufacturing Technician

Dave Everett is the newest member of the ProtoCAM team! He joins us as an additive manufacturing technician in our finishing workshop. Everett has ample experience in art, design, and finishing.

ProtoCAM to Exhibit at 2019 SHOT Show in Las Vegas

Join ProtoCAM at the National Shooting Sports Foundation’s (NSSF) SHOT Show January 21-22, 2018 in Las Vegas, Nevada!

ProtoCAM to Participate in Made in America Career Connection Days!

ProtoCAM will attend the “Made in America Career Connection Days” event at Da Vinci Science Center in Allentown, PA. The event will run from 10 a.m. – 2 p.m., Thursday, November 8 through Saturday, November 10.

ProtoCAM to Host Lunch & Learn

ProtoCAM is hosting a Lunch & Learn event here at our facility on Wednesday, November 7, 2018 from 11:30 a.m. – 1:30 p.m. This event is presented by the Manufacturers Resource Center (MRC). Join us as Ed Graham, Vice President of Additive Manufacturing, discusses “Trends in 3D Additive Manufacturing: Reorienting the Industry for Production Manufacturing.”

ProtoCAM to Exhibit at ICI Technical Conference & Expo

ProtoCAM will be exhibiting in booth #007 at the 65th Annual Investment Casting Institute (ICI) Technical Conference & Expo, October 21 – 24, 2018 in Kansas City, MO.

ProtoCAM to Exhibit at Annual MAPP Conference

Join ProtoCAM at the Manufacturers Association for Plastics Processors (MAPP) annual Benchmarking and Best Practices Conference, October 11-12 in Indianapolis, IN! This conference is a no-nonsense business exchange designed to provide profit-impacting information to senior executives in the plastics manufacturing industry.

Join ProtoCAM for Manufacturing Day 2018!

Come one, come all, to ProtoCAM’s annual Manufacturing Day Event! Friday, October 5, 2018  | Tours beginning at 9:30 a.m. and 1:30 p.m. The annual National Manufacturing Day event invites teachers, classes, business professionals, and all interested others to learn firsthand about today’s manufacturing advances and careers. ProtoCAM will provide guided tours of our facility, and…

ProtoCAM to Host Breakfast & Learn, Presented by the East Penn & Western Lehigh Chambers of Commerce

  Join us Tuesday, September 18th, 2018 for our Breakfast & Learn event at ProtoCAM. This event is presented by the East Penn & Western Lehigh Chambers of Commerce. At this event, attendees will learn about the latest innovations in the field of 3D additive manufacturing and all about ProtoCAM’s offerings, including Multi Jet Fusion…

ProtoCAM in the Community: Marketing Coordinator Volunteers with Girl Scouts

ProtoCAM loves educating and volunteering within our local community! Dale Bond, our Marketing Coordinator here at ProtoCAM, is currently volunteering at a local Girl Scout camp for two weeks.

New Intern Goes From Printing Model Trains to ProtoCAM Products

ProtoCAM is pleased to welcome Nolan Kacsur, who will be joining ProtoCAM for the summer as one of our interns. Kacsur, along with our marketing intern, Ashley Jordan, is taking part in Governor Tom Wolf’s State Local Internship Program (SLIP), which provides for summer internships with local employers across Pennsylvania. He has come to ProtoCAM…

New Intern to Bring Artistic Talent to ProtoCAM

ProtoCAM is pleased to welcome the first of two summer interns, Ashley Jordan. Jordan is participating in Governor Tom Wolf’s State Local Internship Program (SLIP), which provides for summer internships with local employers across Pennsylvania.

ProtoCAM Visits the IronPigs for Annual 2018 Picnic

This past weekend, we headed out of the office to see the IronPigs at Coca-Cola Park for our annual ProtoCAM picnic! The game featured the Lehigh Valley IronPigs vs the Toledo Mud Hens. Jarett Graham, son of Ed Graham, our Vice President of Additive Manufacturing, threw out a first pitch. Mascots FeRROUS and FeFe were…

ProtoCAM to Exhibit at Atlantic Design & Manufacturing

Join ProtoCAM at the Atlantic Design and Manufacturing event (ADM) in New York, NY, June 12-14, 2018.

ProtoCAM to Attend NPE2018: The Plastics Show

Connect with ProtoCAM at NPE2018: The Plastics Show, the world’s most influential plastics trade event May 7-11 in Orlando, FL. Bob Holbrook, ProtoCAM’s Vice President of Sales and Marketing, will be available at the event for information and discussion

ProtoCAM to Attend RAPID + TCT in Fort Worth, TX

Connect with ProtoCAM at RAPID + TCT, April 23-26 in Fort Worth, Texas! RAPID + TCT is North America’s preeminent event for discovery, innovation, and networking in 3D manufacturing.

ProtoCAM to Exhibit at PACK EXPO East

ProtoCAM is headed to nearby Philadelphia, PA from April 16 – 18 to exhibit at this year’s PACK EXPO East. Come visit us in booth #2227! PACK EXPO East exhibits the latest advances in the packing industry and allows attendees to investigate the best solutions to give their companies a competitive advantage.

ProtoCAM to Present and Compete at AMUG Conference

ProtoCAM will be attending this year’s Additive Manufacturing Users Group (AMUG) Conference, held April 8-12, 2018 in St. Louis, MO. Ed Graham will present on “Understanding Your SL Patterns for Investment Castings,” while ProtoCAM has also entered the Technical Competition once again this year.

ProtoCAM to Exhibit at Southeast Design-2-Part

Come and visit ProtoCAM in booth #230 at the Southeast Design2Part Show on March 28th and 29th in Atlanta, Georgia!

ProtoCAM Claims a Win in “What’s So Cool About Manufacturing?” Video Contest

ProtoCAM teamed up with East Penn Lower Macungie Middle School to take home several wins in the Dream It. Do It. PA’s 2017 student video contest, “What’s So Cool About Manufacturing?”

ProtoCAM to Attend Da Vinci Science Center Engineering Career Days!

ProtoCAM will attend the “Engineer Your World” event during Engineering Career Days at the Da Vinci Science Center in Allentown, PA. The event will run from 10 a.m. – 2 p.m. on Friday, February 23.

ProtoCAM to Present at AMBA 2018 Conference

ProtoCAM will be attending the American Mold Builders Association’s (AMBA) Annual Conference February 14-16 in Grand Rapids, MI! There, Ed Graham, ProtoCAM’s Engineering Manager, will present on “Trends in Metal 3D Printing.”

ProtoCAM to Exhibit at 2018 SHOT Show in Las Vegas

Join ProtoCAM at the National Shooting Sports Foundation’s (NSSF) SHOT Show January 22-23, 2018 in Las Vegas, Nevada! You can catch ProtoCAM at the SHOT Supplier Showcase Monday and Tuesday in booth #S1724.

ProtoCAM to Participate in Da Vinci Center Manufacturing and Coding Days

Join ProtoCAM on Friday, November 8 between 10 a.m. and 2 p.m. for the Manufacturing and Coding Days Event at the Da Vinci Science Center in Allentown, PA! We will be educating students on the various careers available in the 3D additive manufacturing field.

ProtoCAM to Host Lunch and Learn

ProtoCAM is hosting a Lunch and Learn event here at our facility on Wednesday, November 8 at 11:30! This event is presented by the Manufacturer’s Resource Center (MRC).

ProtoCAM Owner to be Featured Speaker at Cimquest Expo

Join ProtoCAM and catch featured speaker Ron Belknap, ProtoCAM owner, at the Cimquest 2017 Advanced Manufacturing Expo October 18-19 in Branchburg, NJ!

ProtoCAM to Exhibit at ICI Technical Conference & Equipment Expo

Join ProtoCAM at the Investment Casting Institute’s (ICI) 64th Annual Technical Conference & Equipment Expo October 15 – 18, 2017 in Covington, KY!

Featured ProtoCAM Speaker to Appear at MAPP Benchmarking & Best Practices Conference

Join ProtoCAM and catch our featured speaker at the Manufacturing Association for Plastics Processors (MAPP) 2017 Benchmarking & Best Practices Conference October 11-13, 2017 in Indianapolis, IN!

Expanded Space + New Printers at ProtoCAM

ProtoCAM is expanding! Since early this year, we’ve been making improvements to increase our space and streamline our shop design. We opened up a back room area in March of this year to accommodate our new HP Jet Fusion machine and production machine, and now we’re expanding even further.

Happy Retirement to Gary Mann!

Gary Mann, a ProtoCAM employee from its start back in 1994, has retired. Mann was the second employee hired at ProtoCAM.

Manufacturing Day 2017

ProtoCAM invites teachers, classes, business professionals, and all interested others to learn firsthand about today’s manufacturing advances and careers.

ProtoCAM to Attend Northeast Pennsylvania Innovation Conference

The Northeast Pennsylvania Innovation Conference brings together technology, education and industry.

ProtoCAM Visits the IronPigs for Annual Picnic

ProtoCAM heads to Coca-Cola Park to see the IronPigs for our annual picnic! The game featured the Lehigh Valley IronPigs vs the Louisville Bats.

ProtoCAM to Exhibit at Atlantic Design and Manufacturing Conference

Discover the latest technologies, new materials, and state-of-the-art manufacturing process at the Atlantic Design & Manufacturing Conference, June 13-15!

Lehigh University Students Visit ProtoCAM

ProtoCAM recently hosted and provided a tour of our facility to a group of students from Lehigh University’s “Product Design II” course.

ProtoCAM to Exhibit and Present at RAPID + TCT

Join ProtoCAM at the RAPID + TCT event May 8-11 in Pittsburgh, Pennsylvania. RAPID + TCT is an additive manufacturing event that showcases product innovations and offers collaborative learning opportunities to accelerate advancement of the technology.

ProtoCAM to Attend AMUG Conference

Come see ProtoCAM at the upcoming Additive Manufacturing Users Group (AMUG) Conference March 19 – 23, 2017, in Chicago, Illinois.

ProtoCAM to Attend Inside 3D Printing Conference & Expo

ProtoCAM will attend the Inside 3D Printing Conference and Expo March 14-15 in New York, NY. Attendees will explore the business applications of 3D printing through conference sessions, keynote presentations, and exhibits.

“What’s So Cool About Manufacturing?” Video Contest

ProtoCAM teamed up with a local middle school to create a video for Dream It. Do It. PA’s 2017 student video contest, “What’s So Cool About Manufacturing?”

ProtoCAM to Appeal to Wider Community with New Hire

ProtoCAM is pleased to announce the recent addition of Dale Bond, who joins on as Marketing Coordinator.

ProtoCAM to Exhibit at Pack Expo East

From February 27th to March 1st ProtoCAM will attend and exhibit at Pack Expo East. We will educate attendees about the ways ProtoCAM’s additive manufacturing and rapid prototyping services increase revenues for our packaging customers.

ProtoCAM now uses SAP Business Management System

Starting January 2017, ProtoCAM integrated SAP business management system into the company processes.

Manufacturing Day 2016 at ProtoCAM

ProtoCAM will host an tours Oct. 4-6 in conjunction with Manufacturing Day, a national celebration of modern manufacturing.

ProtoCAM Returns to Javits Center for ADM

ProtoCAM, a leading provider of value-added additive manufacturing and rapid prototyping services, will return to Javits Center in June.

NEPA Innovation Conference Presentations

ProtoCAM selected to present multiple sessions at inaugural Northeastern Pennsylvania Innovation Conference.

ProtoCAM Adds Sales and Marketing Manager to Team

We are excited to announce the growth of ProtoCAM with the hiring of Bob Holbrook as Sales and Marketing Manager. Learn more about Bob.

Manufacturing 4 The Future

Onward and upward! Learn more about ProtoCAM’s long history of service for customers in the Aerospace, Defense and Medical fields next week in Hartford. Join ProtoCAM May 3-5 for the Manufacturing 4 The Future trade show at the Connecticut Convention Center in Hartford. Mfg4 is an event developed for the aerospace, defense and medical industries, with an emphasis on…

NYC Additive Manufacturing shows

Join ProtoCAM in the Big Apple the second week of April. We’ll be there most of the week to educate and answer questions on the latest 3D advances: April 11-12 at the Javits center, and the 13-14th in Secaucus. “ProtoCAM has been doing professional 3D printing and additive manufacturing for over twenty years, so attendance…

Prototype Today Shares ProtoCAM Design & Manufacturing Show News

Prototype Today shares news that ProtoCAM will be exhibiting at the Design & Manufacturing show taking place in Philly on October 7 & 8.

WFMZ News features ProtoCAM’s MFG Day Open House

WFMZ visited ProtoCAM’s Open House as a featured event happenings on the evening news.

ProtoCAM Open House in Morning Call

The Morning Call has listed ProtoCAM Open House as a featured event that’s taking place on Friday, October 2.

ProtoCAM to Exhibit at Design & Manufacturing Show in Philadelphia

Slated for October 7-8, the Design & Manufacturing Show provides ProtoCAM an opportunity educate attendees on additive manufacturing technologies available to firms interested in developing and creating the perfect prototype or part.

ProtoCAM Hosts Manufacturing Day 2015

ProtoCAM will host an open house on Oct. 2 in conjunction with Manufacturing Day, a national celebration of modern manufacturing.

ProtoCAM Exhibits at Design-2-Part Pittsburgh Exhibit

Next week, ProtoCAM will set up in Booth 115 during the two-day show and help attendees separate 3D printing fact from fiction.

ProtoCAM to Speak at Hatch House Ventures’ 3D Printing Event

ProtoCAM, a leading provider of value-added additive manufacturing, rapid prototyping and industrial 3D printing services, is pleased to announce that Ed Graham, Engineering Manager, has been invited to serve as a featured speaker at Hatch House Ventures’ 3D Printing Innovation Event.

ProtoCAM’s Ed Graham Contributes Benefits of 3D Printing to R&D Magazine

ProtoCAM’s Ed Graham recently contributed an article to R&D Magazine in which he outlines some very real benefits to using additive manufacturing technologies in R&D.

MedTech Intelligence Runs Article from ProtoCAM President, CEO Ron Belknap

The time is right to use AM technologies in the med device industry, says ProtoCAM President & CEO Ron Belknap.

ProtoCAM to Exhibit in Pittsburgh and Philadelphia PA

ProtoCAM, a leading provider of value-added additive manufacturing, rapid prototyping and industrial 3D printing services, will be exhibiting at the Design-2-Part and Design & Manufacturing Pennsylvania shows.

Additive Manufacturer ProtoCAM Featured in Lehigh Valley Business Journal

The amazing things happening at ProtoCAM were featured in the June 8th issue of the Lehigh Valley Business Journal.

ProtoCAM Open House on WFMZ

WFMZ-TV reported on ProtoCAM’s May open house, which was attended by U.S. Rep. Charlie Dent.

ProtoCAM Additive Manufacturing Open House

ProtoCAM will host a May 28 open house to showcase additive manufacturing capabilities and discuss opportunities to use industrial 3D printing technology in manufacturing.

ProtoCAM Nominated for ImPAct Award

Allentown, Pennsylvania-based ProtoCAM is being recognized for creating jobs that pay and their economic impact within the Commonwealth as part of the third annual Governor’s ImPAct Awards.

ProtoCAM Exhibits Design at-2-Part Philadelphia Exhibit

ProtoCAM, a leading provider of value-added additive manufacturing, rapid prototyping and industrial 3D printing services, will be exhibiting at Design-2-Part, a Mid-Atlantic trade show for design and contract manufacturers.

ProtoCAM at Lehigh Valley Business Expo 2015

ProtoCAM, a leading provider of value-added additive manufacturing and rapid prototyping services, will be exhibiting at D2P in April.

PET Clear Bottle Finish

ProtoCAM makes its proprietary bottle finish process — which results in true-to-form, clear prototypes — available to customers.

ProtoCAM Educates Lehigh Valley Community on Additive Manufacturing

As part of its commitment to the local community, ProtoCAM provides educational events on industrial 3D and additive manufacturing technologies.

ProtoCAM Named Business of Year Finalist

Allentown-based ProtoCAM, a value-added additive manufacturing, rapid prototyping and industrial 3D printing services provider, has been named a finalist in Lehigh Valley Business’ Business of the Year awards program.

Additive Manufacturing Presentation to MRC

Ed Graham, ProtoCAM’s Engineering Manager, led a 3D printing and additive manufacturing lunch and learn for Manufacturers Resource Center last month, which was attended by area manufacturing professionals.

ProtoCAM at Lehigh Valley Business Expo 2014

ProtoCAM, a leading provider of value-added additive manufacturing and rapid prototyping services, will be exhibiting at LVB Expo in October.

Excellence in Additive Manufacturing

ProtoCAM’s new website presents visitors with an intuitive experience and provides information on the company’s offerings as well as general industry info.