Request for Rapid Prototype Quote

Submit an Online Request for Quotation

Please take a moment to read our Quality/Return Policy before continuing.
Use our system to request a quotation over the Internet at any time. It consists of three steps:

Fill out the contact information including the desired product and properties
Transmit the file to us - we have instructions for email, ftp, and web transfer
Wait for the quotation to be emailed or faxed to you, usually within 2 hours

Step 1: Specify requirements

Fill in each field, and press Continue when ready. We will contact you if we have any further questions about your requirements.

If your browser does not support forms, send us e-mail at sales@protocam.com

Contact Information

Name:	*
Title:
Company:	*
Address:	*

City:	*
State:	*
Zip:	*
Telephone:	*
Fax:
Email:	*
Remember Me:

Required *

Deliverable

Please select the services you would like us to quote. Select all that apply.

3D CAD Work
Stereolithography Part

( Preferred Resin: ** )
Selective Laser Sintering Part
Urethane Casting
Metal Casting
Rapid Tooling
Other (Please explain below)

** Resin availability depends on which machine is suitable to run your prototypes; each machine has only one resin in it. Please see this page for material data sheets.

Details

Please furnish some details about your project. Some items of note may be part quantity, desired finish (if using stereolithography), surfaces requiring special tolerances, parts that must fit together, holes that need to be reamed to a specific size, or holes that need inserts in them. If you requested metal or urethane castings, please specify the desired part quantity and material (or material properties to match).

Step 2: Transmit files

Please upload your prototype part CAD files by browsing for them using the above buttons. If you would like to ensure a quick transfer, please put the files into a ZIP archive (created by WinZip, among others). Please note that there is a 100 megabyte limit for the combined size of all of the files on this form.

You can also transfer the files for your quote via email or ftp, please see the instruction page for the necessary details.

Please provide your part in STL, SolidWorks, Pro/ENGINEER, or any other supported format.

File1:

File2:

File3:

File4:

File5:

Proceed to step 3: Wait for your quote

Please submit this request for quote to have us evaluate it. Quotations typically are emailed to you in PDF format within 2 hours. If you would like your quote faxed instead, please let us know.