Website Legal Notices, Terms and Conditions of Use, Privacy Statement

Legal Notices

Introduction. ProtoCAM, including its subsidiaries and affiliates ("ProtoCAM" or "we" or "us" or "our") provides the information contained on this website or any of the pages comprising the website ("website") to visitors ("visitors") (cumulatively referred to as "you" or "your" hereinafter) subject to the terms and conditions ("terms") set out in these website legal notices, terms and conditions, privacy policy and any other relevant terms and conditions, policies and notices which may be applicable to a specific section or module of this website. Your access to and use of this website signifies your agreement with these terms.

Information on the website. While every effort is made to update the information contained on this website, neither ProtoCAM nor any third party or data or content provider make any representations or warranties, whether express, implied in law or residual, as to the sequence, accuracy, completeness or reliability of information, opinions, research information, data and/or content contained on the website (including but not limited to any information which may be provided by any third party or data or content providers) ("information") and shall not be bound in any manner by any information contained on the website. ProtoCAM reserves the right at any time to change or discontinue without notice, any aspect or feature of this website. No information shall be construed as advice and information is offered for information purposes only. If you find an error or omission at this site, please let us know.

Trademarks. The ProtoCAM trademarks, names, logos and service marks (collectively "trade marks") displayed on this website are registered and unregistered trade marks of ProtoCAM or their business partners. Other companies trade marks may also be used on this site for their trademarked products as indicated. Nothing contained on this website should be construed as granting any license or right to use any trademark without the prior written permission of ProtoCAM. The contents of this website are protected from copying or distribution under national and international copyright laws and treaties throughout the world. Copyright © ProtoCAM. All rights reserved.

External links. External links may be provided for your convenience, but they are beyond the control of ProtoCAM and no representation is made as to their content. Use or reliance on any external links and the content thereon provided is at your own risk. When visiting external links you must refer to that external websites terms and conditions of use. No hypertext links shall be created from any website controlled by you or otherwise to this website without the express prior written permission of ProtoCAM.

Warranties. ProtoCAM makes no warranties, representations, statements or guarantees (whether express, implied in law or residual) regarding the website, the information contained on the website, your or your company's personal information or material and information transmitted over our system.

Disclaimer of liability. ProtoCAM shall not be responsible for and disclaims all liability for any loss, liability, damage (whether direct, indirect or consequential), personal injury or expense of any nature whatsoever which may be suffered by you or any third party (including your company), as a result of or which may be attributable, directly or indirectly, to your access and use of the website, any information contained on the website, your or your company's personal information or material and information transmitted over our system. In particular, neither ProtoCAM nor any third party or data or content provider shall be liable in any way to you or to any other person, firm or corporation whatsoever for any loss, liability, damage (whether direct or consequential), personal injury or expense of any nature whatsoever arising from any delays, inaccuracies, errors in, or omission of any share price information or the transmission thereof, or for any actions taken in reliance thereon or occasioned thereby or by reason of non-performance or interruption, or termination thereof.

Terms and Conditions of Use

Use of this website. ProtoCAM does not make any warranty or representation that information on the website is appropriate for use. By accessing the website, you warrant and represent to ProtoCAM that you are legally entitled to do so and to make use of information made available via the website.

Entire agreement. These website terms and conditions constitute the sole record of the agreement between you and ProtoCAM in relation to your use of the website. Neither you nor ProtoCAM shall be bound by any express tacit or implied representation, warranty, promise or the like not recorded herein. Unless otherwise specifically stated these website terms and conditions supersede and replace all prior commitments, undertakings or representations, whether written or oral, between you and ProtoCAM in respect of your use of the website.

Alteration. ProtoCAM may at any time modify any relevant terms and conditions, policies or notices. You acknowledge that by visiting the website from time to time, you shall become bound to the current version of the relevant terms and conditions (the "current version") and, unless stated in the current version, all previous versions shall be superseded by the current version. You shall be responsible for reviewing the then current version each time you visit the website.

Conflict. Where any conflict or contradiction appears between the provisions of these website terms and conditions and any other relevant terms and conditions, policies or notices, the other relevant terms and conditions, policies or notices which relate specifically to a particular section or module of the website shall prevail in respect of your use of the relevant section or module of the website.

Privacy Policy

General Privacy Policy Statement
ProtoCAM recognizes its obligation to its customers, community and online visitors to adhere to the highest standards of decency, fairness, and integrity. Likewise, ProtoCAM is dedicated to the fundamentals of protecting your privacy on the Internet.

Gathering and Use of Information
ProtoCAM only collects personal information from our visitors on a voluntary basis. We do not require any personal information from visitors to obtain access to our site. Any use of cookies in this site is only for your convenience, and can be disabled at your option. However, in order to respond to the contact section on our websites, you will have to provide personal information. Personal information received from any visitor will only be used for internal marketing, supply or employment purposes and will not be sold or provided to any non-affiliated companies except to provide products and services that you have requested.

Confidentiality and Security
We limit access to personal information about you to employees who we believe reasonably need to come into contact with that information to provide products or services to you or in order to do their jobs. We have physical, electronic, and procedural safeguards that comply with federal regulations to protect personal information about you.

Non-Disclosure
We realize how competitive today's economy is, and we know how important your project is to you. Therefore, we never divulge the details of any project we are working on, or have worked on in the past, to an outside party without your permission. Full confidentiality is always preserved through non-disclosure agreements (NDAs).

Links
The ProtoCAM website may contain links to other sites. We make every effort only to link to websites that share our high standards of decency, fairness, and integrity. We try our best to ensure that these links are safe for visitors, but the privacy and data collection practices on any linked websites are entirely separate from ProtoCAM and are not covered by this Privacy Policy. ProtoCAM shall not be responsible for any failure on the part of any linked websites to comply with any privacy policy posted on the website, or any contractual or other legal obligations to which the operators of such website may be subject. In addition, other websites may link to ProtoCAM's website without ProtoCAM's knowledge or consent. ProtoCAM has no responsibility for the content, policies or actions of any other websites.

Changes and Updates to this Privacy Policy
ProtoCAM's website content and features may be updated, revised, modified and supplemented. ProtoCAM reserves the right to change the information, features, products, policies, promotions, disclosures and disclaimers at any time. Changes to this Privacy Policy will be posted on our website. Please check the policy periodically for changes. The date of the last update to this Privacy Policy is listed at the bottom of this page. The continued use of this website following the posting of changes to this Privacy Policy means you accept those changes.

Summary
As in all business operations, ProtoCAM approaches our communications on the Internet with respect for, and commitment to, individual privacy rights, concern, and respect for our visitors. We support active self-regulation to ensure that responsible marketers can maintain the right to use all communication media to interact with its consumers.

Comments or questions
If you have any questions, comments or concerns arising from the website, the privacy policy or any other relevant terms and conditions, policies and notices or the way in which we are handling your personal information please contact us at:

ProtoCAM
3848 Cherryville Road
Northampton, PA 18067
Phone: 610-261-9010
Fax: 610-261-9350

Last updated: October, 2007